Isolite: 800.888.5483 Isolite West: 800.799.5343
LightPath

Emergency Lighting

LTP Series

Low level, fully recessed LED Emergency Light. Vandal resistant design. Paintable/wall paper friendly housing designed to seamlessly blend with any decor. Puts light on the floor where it is needed. More effective in illuminating the path of egress than traditional ceiling or wall-mounted emergency lights. Uses three high-output white LEDs with just 11 watts of total load. ADA Compliant and UL Listed to the UL 924 Standard.

Product Description

Specifications

Construction
Durable powder coated white 1/8″ die-cast aluminum housing which can be field painted or wall papered

Battery
  • Option of Lead Calcium or NiCad
  • 2 Hour run time standard

Lamp
  • 3 High-output white LEDs with just 11 watts of total load
  • Up to 50 feet on center spacing over 4-foot path of egress

Approvals
  • Listed by UL to the UL 924 standard and CSA C22-2 No. 141-10
  • Meets or exceeds all performance standards as required by NFPA 101, NFPA 70, NEC and OSHA
  • Meets preferred emergency egress lighting method described in the NFPA 101 Life Safety Code Section A.7.8.1.3
  • NYC Calendar number pending
  • Chicago approved
  • ADA compliant
  • Buy America Compliant: Qualifies for Buy America Act, Section 25, paragraph 25.4 as stipulated in the ARRA (American Recovery and Reinvestment Act) section 1605 for Levels 1&2

Electronics
  • Solid State microprocessor controlled circuitry
  • Line latch, brown out and battery LVCO standard
  • Automatic self diagnostic circuit which discretely monitors lamp load, transfer circuit, battery capacity, door operation and motor drive
  • Field-selectable 120 or 277 VAC 60HZ input

Features
  • Low level, fully recessed LED Emergency Light designed to be mounted 18″ above floor
  • Compact and low profile design
  • Tamper Resistant Design with no shown mounting hardware
  • Paintable/wall paper friendly housing designed to seamlessly blend with any decor.
  • Puts light on the floor…where it is needed
  • More effective in illuminating the path of egress than traditional ceiling or wall mounted emergency lights
  • Designed for new construction or retrofit applications. Mounting hardware comes standard for both applications.
  • Pre-ship back box for quick installation
  • Modular assembly and quick connector wiring allows for easy and fast assembly
  • Optional infra-red remote transmitter with selectable 30 second or 90 minute tests
  • Manual test switch and LED AC indicator light

Warranty
3-year warranty

Downloads

FileAction
Spec Sheet  Download  
LightPath IES File  Download  
Instructions  Download  
SD Option  Download